Netgear EX3700 extender Setup | AC750
Netgear EX3700 extender Setup via Web-Browser Method
- After putting the Netgear AC750 EX3700 extender on, watch for the solid green power LED to turn on.
- Connect to your home modem or router using a cable.
- Open a web browser, navigate to http://www.mywifiext.net, and select "New extender setup."
- After selecting the WiFi network you want to expand, click NEXT.
- Enter the security settings and the network name you want to use. Press NEXT.
- The wireless range extender configuration has been applied to your extender. To continue with the registration, click Next.
- After completing the registration, click Finish.
Netgear EX3700 extender Setup Through WPS Method
This method involves setting up your Netgear EX3700 AC750 extender using the Wi-Fi Protected Setup (WPS) feature.For Netgear EX3700 extender Setup using WPS here are the steps:
- Turn on the Netgear AC750 EX3700 extender.
- Put the extender and your Wi-Fi router in the same room.
- Plug the extender into a power outlet.
- Wait for the Power LED
- Press the WPS button on the extender.
- Check if the Link Status LED on the Netgear EX3700 lights up white. If it does, it means the connection between your router and extender is good.
Note: The first time you press the WPS button, your extender tries to connect to the router’s 5 GHz band if your router supports it. Many problems during the Netgear AC750 WiFi range extender setup may arise if your extender failed to establish a connection with the router’s 5 GHz band on the first try. Get in touch with us right away to have such problems resolved
Netgear EX3700 extender Factory reset
If you want to completely erase all settings and configurations on the extender, such as network names, passwords, and other customizations, a factory reset will revert it back to its original factory settings. To perform a hard factory reset on your Netgear EX3700 extender:
- Locate the reset button on the extender. It's typically a small hole labelled "Reset."
- Press and hold the reset button
- Release the reset button when you see the Power LED blink.
- Wait for the extender to restart and reset to its factory default settings. This may take a few minutes.
- Once the reset is complete, you may need to set up your extender again from scratch.
Soft Factory Reset
A soft factory reset on your Netgear EX3700 extender can be done through the web interface. Here's how:
- Log in to your extender's web interface using a web browser.
- Navigate to the settings or administration section.
- Look for the option to reset or restore the extender to factory settings.
- Follow the on-screen instructions
- Once the reset is complete, the extender will restart and return to its factory default settings, but your personalised configurations such as network name and password might remain unchanged.
Netgear AC750 Firmware
Update Firmware After EX3700 Setup
- Turn on your Netgear AC750 EX3700 WiFi extender.
- Connect your router to the extender.
- Open any web browser.
- Type mywifiext.net in the address bar and press Enter.
- Log in to your extender with your username and password.
- Go to the settings menu
- Select Firmware Upgrade.
- Click on the Check button.
- If there's a new firmware version, click Yes to upgrade.
- Wait for the Netgear EX3700 firmware update to complete.
Netgear WiFi Extender EX3700 Setup | AC750 Common Issues
- Can't open mywifiext.net.
- Forgot mywifiext password.
- Extender connected but no internet.
- Can't connect to mywifiext.local.
- Extender not connected to network.
- Netgear Genie app won't open.
- Trouble accessing 192.168.1.250 IP address.
- Lost configuration CD.
- Problems with Wi-Fi connectivity.
- Netgear Genie setup page keeps appearing after EX3700 setup.
- Forgot default password for Netgear extender.
- LED lights on extender not stable.
- Can't open mywifiext.com.
- Unable to login to Netgear EX3700 extender.
- EX3700 losing internet connection.
- Can't update Netgear firmware.
- Can't access mywifiext.net after EX3700 update.
- Errors with MAC address filtering.
- EX3700 not functioning.
- Extender not connecting to internet.
- Unable to find Netgear extender network name.
- Netgear extender not working.
- No internet connection on Netgear EX3700.
- Red light on Netgear extender causing issues.
- Unable to reset Netgear extender.
- Internet connected but not working.
Netgear EX3700 extender Setup Troubleshooting Tips
Follow the troubleshooting procedures listed below to resolve any setup issues with the Netgear extender EX3700:
- Check if the Netgear AC750 EX3700 extender is plugged in properly and getting power from the wall outlet.
- Make sure the wall plug isn't damaged or causing a short circuit.
- Ensure you have a high-speed internet connection.
- Double-check all wired connections and avoid using damaged cables.
- Keep the extender away from walls, corners, and interference sources like microwaves, cordless phones, etc.
- If mywifiext.net isn't working, make sure you've entered the correct URL in the address bar.
- Try restarting your Netgear AC750 EX3700 by powering it off and on again, then attempt the setup process once more.
- Use the latest version of your web browser when logging into mywifiext.net.